inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

AFM60A-S4NB018x12 – Absolute encoders – SICK Encoders

USD $ 687.54

SKU: 1059039

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

Part Number: 1059039
Encoders Model: AFM60A-S4NB018x12
OEM Spec Ref 

Interfaces

Communication interfacePROFINET
Encoder profileV4.1 class3
Data transmission rate (baud rate)10 Mbit/s

100 Mbit/s

Transmission mediumCAT-5e cable
Initialization time6 s
Cycle time≤ 1 ms
Parameterising dataNumber of steps per revolution

Number of revolutions

PRESET

Counting direction

Sampling rate for speed calculation

Unit for output of the speed value

Round axis functionality

Available diagnostics dataMinimum and maximum temperature

Maximumspeed

Power-on counter

Operatinghours counter power-on/motion

Counter of direction changes/number of movements cw/number of movements ccw

Maximum supply voltage

Electrical data

Connection typeMale connector, 1x, M12, 4-pin, axial 1)

Female connector, 2x, M12, 4-pin, axial 2)

Supply voltage10 … 30 V
Power consumption≤ 3 W (without load)
Reverse polarity protection
MTTFd: mean time to dangerous failure80 years (EN ISO 13849-1) 3)
  • 1) A-coded.
  • 2) D-coded.
  • 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

Mechanical data

Mechanical designSolid shaft, face mount flange
Shaft diameter10 mm
Shaft length19 mm
Weight0.2 kg
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum
Start up torque0.5 Ncm (+20 °C)
Operating torque0.3 Ncm (+20 °C)
Permissible Load capacity of shaft80 N / radial

40 N / axial

Operating speed≤ 9,000 min⁻¹ 1)
Moment of inertia of the rotor6.2 gcm²
Bearing lifetime3 x 10^9 revolutions
Angular acceleration≤ 500,000 rad/s²
  • 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Weight0.357 kg
Dimensions13.5 × 9 × 18 cm

Title

Go to Top