inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

Altistart 01 – Soft Starter For Asynchronous Motor – Schneider Variable Speed Drives and Soft Starters

USD $ 377.37

SKU: ATS01N232QN

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Specifications

Main
Part NumberATS01N232QN
Range of productAltistart 01
Product or component typeSoft starter
Product destinationAsynchronous motors
Product specific applicationSimple machine
Device short nameATS01
Network number of phases3 phases
[Us] rated supply voltage380…415 V – 10…10 %
motor power kW15 kW, 3 phases at 380…415 V
IcL starter rating32 A
utilisation categoryAC-53B conforming to EN/IEC 60947-4-2
current consumption160 A at nominal load
Type of startStart with voltage ramp
power dissipation in W4.5 W at full load and at end of starting
324.5 W in transient state
Complementary
Assembly styleWith heat sink
Function availableIntegrated bypass
Supply voltage limits342…456 V
supply frequency50…60 Hz – 5…5 %
Network frequency47.5…63 Hz
Output voltage<= power supply voltage
[Uc] control circuit voltageBuilt into the starter
starting timeAdjustable from 1 to 10 s
1 s / 50
10 s / 5
5 s / 10
Deceleration time symbAdjustable from 1 to 10 s
Starting torque30…80 % of starting torque of motor connected directly on the line supply
discrete input typeLogic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage24…40 V
discrete input logicPositive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current2 A DC-13
3 A AC-15
discrete output typeOpen collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage24 V (voltage limits: 6…30 V) open collector logic
minimum switching current10 mA at 6 V DC for relay outputs
maximum switching currentRelay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
Tightening torque0.5 N.m
1.9…2.5 N.m
electrical connection4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit
Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit
Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit
Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit
4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit
Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible with cable end 1 1…6 mm² AWG 10 power circuit
MarkingCE
Operating positionVertical +/- 10 degree
Height154 mm
Width45 mm
Depth131 mm
Net weight0.56 kg
Compatibility codeATS01N2
Motor power range AC-315…25 kW at 380…440 V 3 phases
Motor starter typeSoft starter
Environment
electromagnetic compatibilityConducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5
StandardsEN/IEC 60947-4-2
Product certificationsC-Tick
CSA
CCC
GOST
UL
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
IP degree of protectionIP20
pollution degree2 conforming to EN/IEC 60947-4-2
vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation-10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude<= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height15.500 cm
Package 1 Width17.500 cm
Package 1 Length5.500 cm
Package 1 Weight678.000 g
Unit Type of Package 2S03
Number of Units in Package 214
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight10.058 kg
Unit Type of Package 3P06
Number of Units in Package 3112
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight90.140 kg
Contractual warranty
Warranty18 months

 

Weight0.56 kg
Dimensions13.1 × 4.5 × 15.4 cm

Title

Go to Top