inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

BTF13-P1HM1025 – HighLine – SICK Wire Draw Encoders

USD $ 2,008.44

SKU: 1034307

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

Part Number: 1034307
Encoders Model: BTF13-P1HM1025
OEM Spec Ref 

Performance BTF

Measurement range0 m … 10 m
EncoderAbsolute encoders
Resolution (wire draw + encoder)0.04 mm 1) 2)
Repeatability≤ 1.5 mm 3)
Linearity≤ ± 2 mm 3)
Hysteresis≤ 3 mm 3)
  • 1) The values shown have been rounded.
  • 2) Example calculation based on the BTF08 with PROFINET: 200 mm (wire draw length per revolution – see Mechanical data): 262,144 (number of steps per revolution) = 0.001 mm (resolution of wire draw + encoder combination).
  • 3) Value applies to wire draw mechanism.

Interfaces BTF

Communication interfacePROFIBUS DP
Programmable/configurable

Electrical data BTF

Connection typeBus adapter for PROFIBUS 1)
Supply voltage10 V … 32 V
Power consumption≤ 2 W (without load)
MTTFd: mean time to dangerous failure150 years (EN ISO 13849-1) 2)
  • 1) Order bus adapter separately.
  • 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

Mechanical data BTF

Weight4.09 kg
Measuring wire materialHighly flexible stranded steel 1,4401 stainless steel V4A
Weight (measuring wire)7.1 g/m
Housing material, wire draw mechanismAluminum (anodised), plastic
Spring return force10 N … 20 N 1)
Length of wire pulled out per revolution332.4 mm
Life of wire draw mechanismTyp. 1,000,000 cycles 2) 3)
Actual wire draw length10.2 m
Wire acceleration40 m/s²
Operating speed8 m/s
Mounted encoderATM60 PROFIBUS, ATM60-P1H13X13, 1030014
Mounted mechanicMRA-F130-110D2, 6028627
  • 1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures.
  • 2) Average values, which depend on the application.
  • 3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.

Ambient data BTF

EMCAccording to EN 61000-6-2 and EN 61000-6-3
Enclosure ratingIP64
Operating temperature range–20 °C … +70 °C
Weight5.19 kg
Dimensions27 × 16 × 38 cm

Title

Go to Top