inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

DFS60E-BDEA01024 – Incremental Encoders – SICK Encoders

USD $ 315.21

SKU: 1037748

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

Part Number: 1037748
Encoders Model: DFS60E-BDEA01024
OEM Spec Ref 

 

Performance

Pulses per revolution1,024 1)
Measuring step90° electric/pulses per revolution
Measuring step deviation at binary number of lines± 0.15°
Error limits± 0.3°

 

Interfaces

Communication interfaceIncremental
Communication Interface detailHTL / Push pull
Number of signal channels6-channel
Initialization time40 ms
Output frequency≤ 300 kHz
Load current≤ 30 mA
Power consumption≤ 0.5 W (without load)

 

Electrical data

Connection typeMale connector, M23, 12-pin, radial
Supply voltage10 … 32 V
Reference signal, number1
Reference signal, position90°, electric, logically gated with A and B
Reverse polarity protection
Short-circuit protection of the outputs✔ 1)
MTTFd: mean time to dangerous failure300 years (EN ISO 13849-1) 2)

 

1) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

 

Mechanical data

Mechanical designBlind hollow shaft
Shaft diameter10 mm
Weight+ 0.2 kg
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum die cast
Start up torque0.8 Ncm (+20 °C)
Operating torque0.6 Ncm (+20 °C)
Permissible movement static± 0.3 mm (radial)

± 0.5 mm (axial)

Permissible movement dynamic± 0.2 mm (radial)

± 0.1 mm (axial)

Operating speed≤ 6,000 min⁻¹ 1)
Moment of inertia of the rotor40 gcm²
Bearing lifetime3.6 x 10^10 revolutions
Angular acceleration≤ 500,000 rad/s²

 

1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.

 

Ambient data

EMCAccording to EN 61000-6-2 and EN 61000-6-4
Enclosure ratingIP67, Housing side, male connector (IEC 60529) 1)

IP65, shaft side (IEC 60529)

Permissible relative humidity90 % (Condensation not permitted)
Operating temperature range0 °C … +85 °C
Storage temperature range–40 °C … +100 °C, without package
Resistance to shocks50 g, 6 ms (EN 60068-2-27)
Resistance to vibration20 g, 10 Hz … 2,000 Hz (EN 60068-2-6)

 

1) With mating connector fitted.

 

Weight0.328 kg
Dimensions13.5 × 9 × 18 cm

Title

Go to Top