inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

LRS-35 Series- 35W Single Output Switching Power Supply – Mean Well

USD $ 16.59USD $ 19.32

SKU: N/A

Product Details

Mean Well LRS Switch Mode Power Supply – 35 W Output

LRS-35 series is a 35W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85~264VAC input, the entire series provides an output voltage line of 5V, 12V, 15V, 24V, 36V and 48V.

In addition to the high efficiency up to 89%, the design of metallic mesh case enhances the heat dissipation of LRS-35 that the whole series operates from -30℃ through 70℃ under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.2W), it allows the end system to easily meet the worldwide energy requirement. LRS-35 has the complete protection functions and 5G anti- vibration capability; it is complied with the international safety regulations such as TUV EN62368-1, EN 60335 – 1 , EN 61558 – 1 / – 2 – 16 , UL 62368 – 1 and GB 4943 . LRS- 35 series serves as a high price- to- performance power supply solution for various industrial applications.

Features :

‧Universal AC input / Full range

‧Withstand 300VAC surge input for 5 second

‧No load power consumption<0.2W

‧Miniature size and 1U low profile

‧High operating temperature up to 70℃

‧Protections: Short circuit / Overload / Over voltage

‧Cooling by free air convection

‧Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, -2-16 for household appliances

‧Operating altitude up to 5000 meters (Note.8)

‧Withstand 5G vibration test

‧High efficiency, long life and high reliability

‧LED indicator for power on

‧Over voltage category Ⅲ

‧100% full load burn-in test

SPECIFICATION

MODELLRS-35-5LRS-35-12LRS-35-15LRS-35-24LRS-35-36LRS-35-48

 

 

 

 

 

OUTPUT

DC VOLTAGE5V12V15V24V36V48V
RATED CURRENT7A3A2.4A1.5A1A0.8A
CURRENT RANGE0 ~ 7A0 ~ 3A0 ~ 2.4A0 ~ 1.5A0 ~ 1A0 ~ 0.8A
RATED POWER35W36W36W36W36W38.4W
RIPPLE & NOISE (max.) Note.280mVp-p120mVp-p120mVp-p150mVp-p200mVp-p200mVp-p
VOLTAGE ADJ. RANGE4.5 ~ 5.5V10.2 ~ 13.8V13.5 ~ 18V21.6 ~ 28.8V32.4 ~ 39.6V43.2 ~ 52.8V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION Note.4±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION Note.5±1.0%±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE TIME1000ms, 30ms/230VAC         2000ms,30ms/115VAC at full load
HOLD UP TIME (Typ.)30ms/230VAC       12ms/115VAC at full load

 

 

INPUT

VOLTAGE RANGE85 ~ 264VAC         120 ~ 373VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)82%86%86%88%88%89%
AC CURRENT (Typ.)0.7A/115VAC          0.42A/230VAC
INRUSH CURRENT (Typ.)COLD START 45A/230VAC
LEAKAGE CURRENT<0.75mA / 240VAC

 

 

PROTECTION

OVER LOAD110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.9V13.8 ~ 16.2V18.75 ~ 21.75V28.8 ~ 33.6V41.4 ~ 48.6V55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover

 

 

ENVIRONMENT

WORKING TEMP.-30 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT±0.03%/℃ (0 ~ 50℃)
VIBRATION10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
OVER VOLTAGE CATEGORYⅢ; According to EN61558, EN50178, EN60664-1, EN62477-1; altitude up to 2000 meters

 

 

SAFETY & EMC

(Note 9)

SAFETY STANDARDSUL62368-1, TUV EN62368-1, EN60335-1, EN61558-1/-2-16,CCC GB4943.1, BSMI CNS14336-1, EAC TP TC 004, AS/NZS 60950.1(by CB),KC K60950-1(for LRS-35-12/24 only), BIS IS13252(Part1): 2010/IEC 60950-1: 2005 approved
WITHSTAND VOLTAGEI/P-O/P:4KVAC I/P-FG:2KVAC  O/P-FG:1.25KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSIONCompliance to EN55032 (CISPR32) Class B, EN55014, EN61000-3-2,-3, GB/T 9254, BSMI CNS13438, EAC TP TC 020, KC KN32,KN35(for LRS-35-12/24 only)
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020, KC KN32,KN35(for LRS-35-12/24 only)

 

OTHERS

MTBF763.6K hrs min.      MIL-HDBK-217F (25℃)
DIMENSION99*82*30mm (L*W*H)
PACKING0.23Kg ; 60pcs/14.8Kg/0.88CUFT
NOTE

1.  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2.  Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.  Tolerance : includes set up tolerance, line regulation and load regulation.

4.  Line regulation is measured from low line to high line at rated load.

5.  Load regulation is measured from 0% to 100% rated load.

6.  Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

7.  5V when the load factor 0~50%, the switching power less is reduced by burst operation, which will cause ripple and ripple noise to go beyond the specifications.

8.  The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft).

9.  The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.

 

Title

Go to Top