inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

SIMATIC DP – CM PROFIBUS DP for ET 200SP CPU Module – Siemens Communication Modules

USD $ 545.27

SKU: 6ES7545-5DA00-0AB0

The CM DP module extends the CPU 1510SP-1 PN / 1512SP-1 PN to include a PROFIBUS DP interface. Which enables either a lower-level or a higher-level PROFIBUS DP line to be established. This has the following advantages:

  • Offloading of the central controller by means of distributed preprocessing
  • CPU 1510SP-1 PN or CPU 1512SP-1 PN possible in standalone mode as DP master

Communication options of the ET 200SP-CPU via CM DP module:

  • As master for PROFIBUS DP according to IEC 61158/EN 50170 for 125 DP slaves
  • As intelligent DP slave for higher-level DP master on PROFIBUS DP
  • Communication with programming devices and HMI devices
  • Communication with other SIMATIC S7 systems
  • Communication with SIMATIC S5 programmable controllers

Siemens Communication Modules DP Product Specifications:

Article number6ES7545-5DA00-0AB0
ET 200SP, cm DP for ET 200SP CPU
General information
Product type designationCM PROFIBUS DP
HW functional statusFS04
Engineering with
● STEP 7 TIA Portal configurable/integrated from versionV13 Update 3
Supply voltage
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
1. Interface
Interface types
● RS 485Yes
Protocols
● PROFIBUS DP masterYes
● PROFIBUS DP slaveYes
● SIMATIC communicationYes
PROFIBUS DP master
● Number of DP slaves, max.125
Services
— PG/OP communicationYes
— EquidistanceNo
— Isochronous modeNo
— Activation/deactivation of DP slavesYes
PROFIBUS DP slave
● Transmission rate, max.12 Mbit/s
● automatic baud rate searchYes
● Address area, max.120
● User data per address area, max.128 byte
Services
— PG/OP communicationYes; Only with active interface
— RoutingYes; Only with active interface
— S7 communicationYes; Only with active interface
— Direct data exchange (slave-to-slave communication)Yes; No subscriber possible – only passive publisher
— DPV1Yes
Transfer memory
— Inputs244 byte
— Outputs244 byte
Interface types
RS 485
● Transmission rate, max.12 Mbit/s
● Cable length, max.100 m
Protocols
SIMATIC communication
● S7 routingYes
● Data record routingYes
Interrupts/diagnostics/status information
Diagnostics functionYes
Diagnostics indication LED
● for module diagnosticsYes; green/red DIAG LED
Potential separation
between backplane bus and interfaceYes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.-25 °C; No condensation
● horizontal installation, max.60 °C
● vertical installation, min.-25 °C; No condensation
● vertical installation, max.50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width35 mm
Height117 mm
Depth75 mm
Weights
Weight, approx.80 g
Weight0.103 kg
Dimensions10.5 × 12.8 × 6.5 cm

Title

Go to Top