inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

SIMATIC ET 200pro – Pneumatic Interface – Siemens Fail- Safe Expansion Modules

USD $ 276.12USD $ 296.82

SKU: N/A

The pneumatic interface is designed for an original FESTO valve terminal. ET 200pro can then also be used for applications requiring flexible pneumatics.

A wide variety of valve functions from the standard FESTO spectrum and a choice of flow rates facilitate an extensive range of applications.

CPV 10 or CPV 14 FESTO valve terminals can be used and are available from FESTO.

Siemens Pneumatic Interface SIMATIC ET 200pro Product Specifications:

Article number6ES7148-4EA00-0AA06ES7148-4EB00-0AA0
ET200PRO, 16DO,Pneumatic Interface CPV10ET200PRO, 16DO,Pneumatic Interface CPV14
Supply voltage
Load voltage 2L+
● Rated value (DC)24 V24 V
● Short-circuit protectionYesYes
● Reverse polarity protectionYesYes
Input current
from load voltage 2L+, max.300 mA; Including valves370 mA; Including valves
from backplane bus 3.3 V DC, max.25 mA25 mA
Power loss
Power loss, typ.2.6 W3.7 W
Address area
Address space per module
● Address space per module, max.2 byte2 byte
Digital outputs
Number of digital outputs1616
Load resistance range
● lower limit500 Ω500 Ω
● upper limit2 500 Ω2 500 Ω
Output current
● for signal “1” rated value12 mA16 mA
● for signal “1” permissible range, min.11 mA14 mA
● for signal “1” permissible range, max.15 mA20 mA
Switching frequency
● with inductive load, max.25 Hz20 Hz
Total current of the outputs (per group)
all mounting positions
— up to 55 °C, max.250 mA; only up to 50 °C, limited by valves330 mA; only up to 50 °C, limited by valves
Interrupts/diagnostics/status information
Diagnostics functionYesYes
Alarms
● Diagnostic alarmYesYes
Diagnoses
● Diagnostic information readableYesYes
Diagnostics indication LED
● Group error SF (red)YesYes
● Status indicator digital output (green)YesYes
Pneumatics
Number of connectable valves, max.1616
permissible working pressure, min.3 bar3 bar
permissible working pressure, max.8 bar8 bar
Rated flow rate400 l/min800 l/min
Valve switching times from “0” to “1”17 ms24 ms
Valve switching times from “1” to “0”25 ms30 ms
Parameter
RemarkDiagnosis load voltage 2L+Diagnosis load voltage 2L+
Response to CPU/master STOPNo
Potential separation
between backplane bus and all other circuit componentsYesYes
Potential separation digital outputs
● between the channels and backplane busYesYes
Isolation
Isolation tested with707 V DC (type test)707 V DC (type test)
Standards, approvals, certificates
Suitable for safety-related tripping of standard modulesYesYes
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1PL dPL d
● Category according to ISO 13849-1Cat. 3Cat. 3
● SIL acc. to IEC 62061SIL 2SIL 2
Dimensions
Width90 mm120 mm
Height130 mm152 mm
Depth47 mm47 mm
WeightN/A
DimensionsN/A

Title

Go to Top