inosakiInosakiinosaki

Contact Us
sales@365accountings.com   

SIMATIC S7-1500 – CP 1542-5 Communications Processor – Siemens Communication Processor

USD $ 897.13

SKU: 6GK7542-5FX00-0XE0

The CP 1542-5 is the communications processor of the SIMATIC S7-1500 for the PROFIBUS bus system. It relieves the CPU from communications tasks.

Communications options of the S7-1500 using communication modules:

  • As master for PROFIBUS DP according to IEC 61158/EN 50170 (max. 32 DP slaves)
  • Communication with programming devices and HMI devices

The number of CPs that can be operated depends on the CPU type and on the communication services used.

Siemens HMI Basic Panel Product Specifications:

Article number6GK7542-5FX00-0XE0
product type designationCP 1542-5
transfer rate
transfer rate
● at the 1st interface according to PROFIBUS9.6 kbit/s … 12 Mbit/s
interfaces
number of interfaces according to Industrial Ethernet0
number of electrical connections
● at the 1st interface according to PROFIBUS1
type of electrical connection
● at the 1st interface according to PROFIBUS9-pin Sub-D socket (RS485)
supply voltage, current consumption, power loss
type of voltage of the supply voltageDC
supply voltage 1 from backplane bus15 V
relative symmetrical tolerance at DC
● at 15 V3 %
consumed current
● from backplane bus at DC at 15 V typical0.1 A
power loss [W]1.5 W
ambient conditions
ambient temperature
● for vertical installation during operation0 … 40 °C
● for horizontally arranged busbars during operation0 … 60 °C
● during storage-40 … +70 °C
● during transport-40 … +70 °C
relative humidity
● at 25 °C without condensation during operation maximum95 %
protection class IPIP20
design, dimensions and weights
module formatCompact module S7-1500 single width
width35 mm
height142 mm
depth129 mm
net weight0.27 kg
fastening method
● S7-1500 rail mountingYes
product features, product functions, product components general
number of units
● per CPU maximum8
● notedepending on CPU type
performance data PROFIBUS DP
service as DP master
● DPV1Yes
number of DP slaves
● on DP master operable32
data volume
● of the address range of the inputs as DP master total2 048 byte
● of the address range of the outputs as DP master total2 048 byte
● of the address range of the inputs per DP slave244 byte
● of the address range of the outputs per DP slave244 byte
service as DP slave
● DPV0Yes
● DPV1Yes
data volume
● of the address range of the inputs as DP slave total240 byte
● of the address range of the outputs as DP slave total240 byte
performance data S7 communication
number of possible connections for S7 communication
● maximum16; depending on the system upper limit
performance data multi-protocol mode
number of active connections with multi-protocol mode16
performance data telecontrol
protocol is supported
● TCP/IPNo
product functions management, configuration, engineering
configuration software
● requiredSTEP 7 Professional V12 SP1 (TIA Portal) or higher
identification & maintenance function
● I&M0 – device-specific informationYes
● I&M1 – higher level designation/location designationYes
product functions diagnostics
product function web-based diagnosticsYes; via S7-1500 CPU
product functions time
product function pass on time synchronizationYes
standards, specifications, approvals hazardous environments
certificate of suitability CCC for hazardous zone according to GB standardYes
Weight0.339 kg
Dimensions0.1 × 0.1 × 0.1 cm

Title

Go to Top